Email:sales@bundor.com    |   Tel: +86 150 0225 9955   |   Wechat: Bundor_marketing   |    Skype: +86 150 0225 9955

Home » Products » Y Strainer
ANSI Class 125 Y-Strainer1
ANSI Class 125 Y-Strainer2
ANSI Class 125 Y-Strainer3
ANSI Class 125 Y-Strainer4
ANSI Class 125 Y-Strainer1 ANSI Class 125 Y-Strainer2 ANSI Class 125 Y-Strainer3 ANSI Class 125 Y-Strainer4

ANSI Class 125 Y-Strainer

【Size Range】: 1/2"--18"

【Pressure】: Class 125

【Body Materials】: cast iron,WCB,stainless steel 304(CF8)

ADVANTAGES

Flange Y-type strainer Y-type filter is a indispensable device in transmission pipeline system, usually installed inlet in pressure reducing valve, pressure relief valve, water valve and other device, the valve is used to remove impurities in order to protect the valve and equipment in normal use.
Size:1/2"--18"
Material: cast iron,WCB,stainless steel 304(CF8)
Pressure: Class 125
Connection:Flange
Temperature range: ≤250℃
Applicable Media:water,oil

Adoptive Standards
Valve Design: DIN3352
Face To Face: DIN3202, BS2080
Flange Drilling: DIN2531/2/3, BS4504

Product Advantage
1,Strainer body meets applicable DIN standard,large inner space,reduce pressure drop.
2,Ductile iron body material,can't broken by transfer and install.
3,Streamline design for low pressure drop.
4,Epoxy coating,prevent corrosion and rust
5,There is pressure tap leave on the bonnet,can install pressure measuring device to test pipe pressure
6,The drain plug can be changed to ball valve according to customer's request.The ball valve can connect with drain pipe.No need to assemble the bonnet when drain contamination with pressure.
7,Can supply different precision filter according to different customer's request,clean easily
8,Dimension of inner cavity inlet is 1.2-1.3 time larger than size,the screen length is 1.5 time than normal,improve flow,Extended cleaning cycle
9,The screen is install by 45 degree,the mesh area is 3-4 times larger than nominal diameter area, lower flow resistance,larger flow
10,Since founded in 1994, own production, sales, design,aftersale, we are your strong support when sale and use.

Standard Test
Body Test: 1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test.
Seat Test: 1.1 times the working pressure with water.
Function / Operation Test: At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test (Open/Close). This test carried out without pressure and at ambient temperature. It ensures the correct operation of the valve / actuator assembly with accessories such as solenoid valve, limit switches, air filter regulator etc.
Special Test: On request, any other test can be carried out according to special instruction by client.

PARAMETER INFORMATION

ANSI Class 125 Y-Strainer drawing
Normal diameter Test pressure MPa Suitable temperatute℃ Suitable medium
MPa shell seal
1.6 2.4 1.76 ≤250 Water,stream,oil
 
Body bonnet Cast iron,ductile iron,HT200、QT400-15
Screen SS304
 
DIMENSIONS  IN  INCHES  AND  MILLIMETERS 
DN L Dk D b n-d H
2" 225.4 121 152 16 4-4 161
2.5" 273 140 178 17.5 4-4 183
3" 292 152.5 190 19 4-4 219
4" 352 190.5 229 24 6-6 238
5" 416 216 254 23.8 6-9 279.3
6" 470 241.3 279 25.4 6-9 315
8" 543 298.5 343 28.6 6-9 400
10" 660.4 362 406 30.2 9-4 482
12" 762 432 483 31.8 9-4 564.6
14" 949 476 533 35 9-8 744
16" 1079.5 570 597 36.6 9-8 846

HOT PRODUCTS

ANSI Class 125 Y-Strainer

PN10/16 Ductile Iron Y-Stainer

125/150LB Ductile Iron Y-Stainer

Stainless Steel Y-strainer

Carbon Steel Y-strainer

CONTACT US

Sales@bundor.com

6520 N Irwindale Ave 204,Irwindale,CA 91702

Contact us now if you have any questions about our company and products.We will retain your information completely private.